DAS SPEED Ultra Low Profile 24K gold 2mm Lipo Plugs (5 pcs) Premium gold-plated contact surfaces Ultra low-profile design for cleaner installations Optimized for low internal resistance (low IR) Smooth and consistent electrical contact Why Gold? - Because internal resistance is the enemy. Gold plating helps maintain stable conductivity over time by resisting oxidation and ensuring consistent electrical transfer — especially important in high-performance RC applications where every bit of efficiency matters. Includes: -5 ultra low profile 24K gold 2mm Lipo Plugs

For PN racing, Gen Ace, Atomic, Reflex Racing, MWX Hardcase Lipo batteries or other 2S Lipo with a bullet (2mm) connectors. This handy charge cable allows you to connect 4mm banana plug to chargers, and the charger's balance board.Total length 40cm, protected by PE wrap High quality Silicon wire 14AWG for power, 22AWG for Balance Plug

For GL Racing, Marka, MWX, PN Racing or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board. Total length 25cmprotected by PE wrap High quality Silicon wire 14AWG for power, 22AWG for Balance Plug

This charging cable was designed to be used with XT60 output chargers to be used with our hard case battery packs.  Durable, stylish and perfect length cables to help you tidy up your pit space!

Replacement cable for the Marka Racing ESC model MZR-ESC-V1 (the cable connects the ESC to the receiver). Length 9cm.

Anschlusskabel mit GL-Stecker (CR-20) zum Anlöten an ESC usw.Länge ca. 7cm

Anschlussstecker für den GL Hardcase Lipo GL-LiHV330 1.5mm Bananenstecker3 Stück

20 AWG Wire fo your Racing Needs. Super Flexible Jacket makes it perfect for Pan Car Rear Ends

These custom made 2mm split plugs by Reflex Racing are designed to be tougher and have less IR than other plugs available in the market. These plugs are manufactured to our strict specification, in order to solder better and have tougher soldering connections going to your battery, since the wires we use in 1/28 can be a bit fragile. In our signature, attention to detail style, we made a ridge on the top of the plug to make it easier to pull on a surface without having to yank on the wire.

Parallel Ladeboard für JST-PH Stecker (2S Lipos)Bis zu 12 Lipos gleichzeitig laden.Variante mit 4mm Banana-Stecker Anschlusskabel.

1 Stecker-Set,Passend um die Standard Stecker von Lipos, Ladekabel und ESC zu ersetzen. Extrem tiefer Übergangswiderstand für möglichst geringen Verlust. Extra satter Sitz, damit die Steckverbindung sich beim Fahren oder bei einem Crash nicht löst. Inhalt: 1 x Stecker, 1 x Buchse aus CNC gefrästem Kunststoff Kupfer pins und stainless steel Schrauben 6 Silikon Kabel (22awg) Features: Der Stecker ist bis 30A geeignet Extra satter Sitz der Steckverbinder Sehr einfach zu löten dank grosser Lötlaschen

XT60 auf PH2.0 Stecker Ladekabel. Geeignet zum Laden und Entladen von einem 2S-Lipo mit PH2.0-Anschluss (GL Racing, PN Racing, Marka Lipos). Hinweis:Diese Kabel sind nicht für das Laden höher als 2A empfohlen!- Hochwertiger Silikondraht 24AWG - Kabellänge: 16cm 

4mm Bananenstecker/XT60 auf PH2.0 Stecker Ladekabel. Geeignet zum Laden und Entladen von einem 2S-Lipo mit PH2.0-Anschluss (GL Racing, PN Racing, Marka Lipos). Hinweis:Diese Kabel sind nicht für das Laden höher als 2A empfohlen!- Hochwertiger Silikondraht 24AWG - Kabellänge: 16cm 

This charging cable was designed to be used with XT60 output chargers to be used with our hard case battery packs.  Durable, stylish and perfect length cables to help you tidy up your pit space!

22 AWG Wire fo your Racing Needs. Super Flexible Jacket makes it perfect for Pan Car Rear Ends

22 AWG Wire fo your Racing Needs. Super Flexible Jacket makes it perfect for Pan Car Rear Ends

For GL Racing, Marka, MWX, PN Racing or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect XT60 Female plugs to chargers, and the charger's balance board. Total length 25cmprotected by PE wrap High quality Silicon wire 14AWG for power, 22AWG for Balance Plug

This charging cable was designed to be used with XT60 output chargers to be used with most industry standard soft packs. It is stylish, reliable and has 20" in length to make the charging easier.

Replacement cable for the Marka Racing ESC model MZR-ESC-V1 (the cable connects the ESC to the receiver). Length 5cm.

The DAS SPEED 24K Low Profile 2mm LiPo Plugs & +/- Plug Tabs were designed for racers who care about clean packaging, reliable electrical contact, and premium finishing details. Featuring high-conductivity gold-plated low-profile plugs, these connectors help reduce resistance and maintain a clean, direct current path between your battery and electronics. The compact design also helps keep installations neat and professional in tight 1/28-scale chassis layouts. Included are matching +/- plug tabs, designed not only to improve contact consistency, but also to make plugging in and unplugging batteries easier. The tabs give you something solid to grip onto — especially useful when space is limited or when removing tight-fitting battery connectors. Technical Highlights Premium gold-plated contact surfacesLow-profile design for cleaner installationsOptimized for low internal resistance (low IR)Smooth and consistent electrical contactEasy-grip +/- plug tabs for simpler battery removal and installation Includes: 1 pair of low-profile 2mm plugs 1 pair of +/- plug tabs mounting/set screws Why Gold? Because internal resistance is the enemy. Gold plating helps maintain stable conductivity over time by resisting oxidation and ensuring consistent electrical transfer — especially important in high-performance RC applications where every bit of efficiency matters. And let’s be honest… They also add that little bit of bling bling that makes you 0.2 seconds faster per lap. (at least in your head.. which still counts...)

This cable design for Ultra Power UP-S4AC ChargerCharging 1S Li-Po Battery  Molex Plug#700380#700430#700444Attention needs to connect the Black/Red plug first, then connect the Blue/Red plug.

For PN racing, Gen Ace, Atomic, Reflex Racing, MWX Hardcase Lipo batteries or other 2S Lipo with a bullet (2mm) connectors. This handy charge cable allows you to connect 4mm banana plug to chargers, and the charger's balance board.Total length 40cm, protected by PE wrap High quality Silicon wire 14AWG for power, 22AWG for Balance Plug

These custom made 2mm split plugs by Reflex Racing are designed to be tougher and have less IR than other plugs available in the market. These plugs are manufactured to our strict specification, in order to solder better and have tougher soldering connections going to your battery, since the wires we use in 1/28 can be a bit fragile. In our signature, attention to detail style, we made a ridge on the top of the plug to make it easier to pull on a surface without having to yank on the wire.

This cable design for Ultra Power UP-S4AC ChargerCharging Nihm battery, best for PN Charging Tray #500757 with 4x Nihm battery

Parallel Ladeboard für JST-PH Stecker (2S Lipos)Bis zu 12 Lipos gleichzeitig laden.Variante mit XT60 Anschlusskabel.

3x JST-PH Parallel charging cable For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board. On the battery side, we have provided 3x JST-PH connectors so that you can charge/discharge up to 3 packs at a time. You do not have to use all 3 of course, using it to charge 1 pack is perfectly fine, but if you would like charge/discharge up to 3 packs together, this cable can do it. For those new to parallel charging, you can google/you tube information on it, but in summary: You can only connect 2S Lipo to this cable Mixing 300mAh, 330mAh, 360mAh together is ok The packs should be reasonably similar in voltage, for example, 2 packs 90% full, 1 pack empty, is NOT such a good idea, as it will cause a lot of current(Amps) going from the full packs to the empty pack, charging the empty pack at very high current(AMps), this might even melt the cable if the Packs are large/high C enough. All empty is fine, ~30%, ~40%, ~50% mix together is fine. Ideally charger capacity set to total mAh of the packs Charger current can scale up according to total capacity of the packs Below is a good video guide: https://www.youtube.com/watch?v=WY194Md6KNg

Produktinformationen "3x GL connector Parallel Charging Cable" [PT0006] 3x GL connector Parallel Charging Cable Details: 3x JST-PH Parallel charging cable For GLA and Atomic AMZ/BZ Lipo batteries or any other 2S Lipo with a JST-PH connector. This handy charge cable allows you to connect 4mm banana plugs to chargers, and the charger's balance board. On the battery side, we have provided 3x JST-PH connectors so that you can charge/discharge up to 3 packs at a time. You do not have to use all 3 of course, using it to charge 1 pack is perfectly fine, but if you would like charge/discharge up to 3 packs together, this cable can do it. For those new to parallel charging, you can google/you tube information on it, but in summary: You can only connect 2S Lipo to this cable Mixing 300mAh, 330mAh, 360mAh together is ok The packs should be reasonably similar in voltage, for example, 2 packs 90% full, 1 pack empty, is NOT such a good idea, as it will cause a lot of current(Amps) going from the full packs to the empty pack, charging the empty pack at very high current(AMps), this might even melt the cable if the Packs are large/high C enough. All empty is fine, ~30%, ~40%, ~50% mix together is fine. Ideally charger capacity set to total mAh of the packs Charger current can scale up according to total capacity of the packs

Package Included: 2 x JST-PH connector power cable

Receiver Cable (RX cable) Compatible with Swave-E2 & Swave-W & W2 ONLY Cannot use on Swave-E 1.0mm JST to 1.5mm JST Wire length: 80mm ** Some aftermarket / no-brand receiver may require swap the cable you will need to consult your receiver seller.

Adapterkabel um Lipos mit GL Connector (GBY-003-GL)  mit dem GL ESC GSC V1.2 zu verwenden. 

Marka Racing safety lipo bag for charging and storage LiPo batteries. Made from fire-proof and fire-resistant material.The bag is in black color and carries the Marka logo.You can store two standard size batteries.

For GLA, Atomic AMZ/BZ and Jomurema Lipo batteries or any other 2S Lipo with a JST-PH connector.This handy charge cable allows you to connect XT60 plug to chargers, and the charger's balance board.On the battery side, we have provided 3 x JST-PH connectors so that you can charge/discharge up to 3 packs at the same time.Charge one battery is fine, if you charge 3 batteries together, make sure all batteries is same type and capacity.Total length 18cm, protected by PE wrapHigh quality Silicon wire 14AWG for power, 22AWG for Balance Plug

Adapterkabel für das Ladegerät Ultra Power UP-S4AC um die üblichen 2S 7.4V Lipos von GL Racing / Marka / PN Racing mit JST-PH 2.0 Stecker zu laden.Adapterkabel:XH (3 Pin Buchse)  zu JST PH 2.0 (3 Pin Stecker)