Bluetooth Modul passend für die ESCGL-BT-ESC-060 und GL-BT-ESC-060-GTR

Anschlusskabel mit GL-Stecker (CR-20) zum Anlöten an ESC usw.Länge ca. 7cm

(For GTR, GLA, GLR ,GLF, GL-RIDER) Technical Specifications: Model: GL-SD-ESC-010T Continuous current: 15A Best Current (10sec): 30A Battery Input: 3,7 Volt / 2cells, 1.2V NiMh/NiCd / 6cells Bec output: 6 Volt / 1 A Weight (without wiring): 4.1g Dimension (L x W x H) mm: 25 x 15 x 8.5 mm Mini-Z Motor limit with 2cell x 3.7V Lipo, The motor Timing is at 0 degree: 10000KV or below Features: Ultra-smooth, precise trottle and braking control compatible with sensored/sensorless brushless motors Data analysis capability (RPM, low voltage and ESC temperature) Easily Programming throug the LED card (not included) Built-in one touch On/Off switch with LED Built-in Low voltage cut-off, Overheat protection and signal loss protection Included: Speed Control, Extended BEC wire, Sensor wireDownloads / Manuals (GL-SD-ESC-010T):ESC User GuidelineESC ProgrammierungESC Erklärungen

Speziell für den GL GTR Technical Specifications: Model: GL-SD-ESC-010T Continuous current: 15A Best Current (10sec): 30A Battery Input: 3,7 Volt / 2cells, 1.2V NiMh/NiCd / 6cells Bec output: 6 Volt / 1 A Weight (without wiring): 4.1g Dimension (L x W x H) mm: 25 x 15 x 8.5 mm Mini-Z Motor limit with 2cell x 3.7V Lipo, The motor Timing is at 0 degree: 10000KV or below Features: Ultra-smooth, precise trottle and braking control compatible with sensored/sensorless brushless motors Data analysis capability (RPM, low voltage and ESC temperature) Easily Programming throug the LED card (not included) Built-in one touch On/Off switch with LED Built-in Low voltage cut-off, Overheat protection and signal loss protection Included: Speed Control, Extended BEC wire, Sensor wireDownloads / Manuals (GL-SD-ESC-010T):ESC User GuidelineESC ProgrammierungESC Erklärungen

GL-BT-ESC-060 (without Built-in Bluetooth) Brushless Sensored Speed Control for 1/28 mini car.Change to 32-bit MCU with ultra-smooth, faster response with precise throttle, brake and reverses control.Support ~2.5A BEC ampere drawn which is raised up by ~70%.Support ~30A instant ampere drawn by the motor which is raised up by ~80%.Bluetooth Module for advanced programming and firmware update through the Mobile APPS.APPS will be available on both IOS and Android.Data Analysis through Mobile APPS(Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing).Software:It is a new developed software with more advanced item functions addedEach item have small step to fine tune.  Specifications:Battery Input Voltage: 2S lipoBEC: 6V/2.5A1/28 motor Limit: 9000kv or belowMax Ampere draw: ~30A per phaseSize: ~23.8x14.0x8.7mm(not include the plug)Weight: ~5.6g(without any wire installed)***********************************************************************The corresponding Bluetooth module GL-PC-60 must be ordered separately!Das dazugehörige Bluetooth Modul GL-PC-60 muss separat dazu bestellt werden!*********************************************************************** Manual  

FOR GLA and GLA-V2

GL-SD-ESC-010 Function Description               GL-SD-ESC-010 Setup value        

Programmierkarte für das ESC GSC 1.2 von GL-Racing

Adapterkabel um Lipos mit GL Connector (GBY-003-GL)  mit dem GL ESC GSC V1.2 zu verwenden. 

Long=90mm (Update on 18 Feb 2019) For X-Power-RJ28-30A

Produktinformationen "GL ESC cable -1 pc ( For Model: GL-SD-ESC-010)" [GL-SD-C90] GL ESC cable -1 pc ( For Model: GL-SD-ESC-010)

GL-BT-ESC-030 (Built-in Bluetooth) Brushless Sensored Speed Control for 1/28 mini car Change to 32-bit MCU with ultra-smooth, faster response with precise throttle,brake and reverses control. Support ~2.5A BEC ampere drawn which is raised up by ~70%. Support ~30A instant ampere drawn by the motor which is raised up by ~80%.Built-in Bluetooth device for advanced programming and firmware update through the Mobile APPS.APPS will be available on both IOS and Android.Real Time Data Analysis through Mobile APPS (Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing). Software: It is a new developed software with more advanced item functions added.Each item have small step to fine tune. All update item functions information can be reviewed from the photos attached. Specs: Battery Input Voltage:  2S lipo BEC:  6V/2.5A 1/28 motor Limit:  9000kv or below Max Ampere draw:  ~30A per phase Size:  ~22.7x14.0x9.6mm (not include the plug) Weight:  ~5.6g(without any wire installed)Download Manual

GL-BT-ESC-030-GTR(Built-in Bluetooth) Brushless Sensored Speed Control for 1/28 mini car *** Spezielle Variante für das GL GTR Chassis ***Change to 32-bit MCU with ultra-smooth, faster response with precise throttle,brake and reverses control. Support ~2.5A BEC ampere drawn which is raised up by ~70%. Support ~30A instant ampere drawn by the motor which is raised up by ~80%.Built-in Bluetooth device for advanced programming and firmware update through the Mobile APPS.APPS will be available on both IOS and Android.Real Time Data Analysis through Mobile APPS (Current Input & Output Throttle, Temperature, RPM, Adv. Timing, Voltage and min. voltage, Max Temperature, RPM & Adv. Timing). Software: It is a new developed software with more advanced item functions added.Each item have small step to fine tune. All update item functions information can be reviewed from the photos attached. Specs: Battery Input Voltage:  2S lipo BEC:  6V/2.5A 1/28 motor Limit:  9000kv or below Max Ampere draw:  ~30A per phase Size:  ~22.7x14.0x9.6mm (not include the plug) Weight:  ~5.6g(without any wire installed)Download Manual