Nur mit der RTA V2 Front kompatibel!Ersatz A-Arms für die V2 Front des RTA.
This part is compatible with the RTA V2 front end (RT003 V2)!!It allows you to precisely adjust the droop of your RTA's front end.Made in high quality aluminium 7075-T6
What is different on this kit ? The rear roll center is lowered by 2mm The battery is moved back on the pivot point The rear pod is now in carbon fiber The rear springs sit is designed to give more consistency to the rear end The weight distribution is different if you use RT090 brass weights What’s the difference on the track ? This kit will give : More on-throttle grip More responsiveness More traction More roll Also, we listened to our customer feedback and decided to add a lot of tuning options on this conversion kit : You can center the servo on the chassis You can use most of dampening system of the market The main goal of this open-mindedness is to give the possibility for all of you to tune your car as you need. Each driver needs something different and now you have the opportunity to do so. To help you understand all tuning options available, we have published some pictures of different tuning options. Also, we have added a tab with all the parts we recommend for making these different set-ups Important note: with this conversion kit, you can no longer use ABS body side clips. You must use Lexan body posts.
Optional aluminum chassis for RTA with LRC conversion kit. Possibility to add brass inserts (RT090) to adjust the weight distribution. The chassis weighs 48gr and each brass weight weighs 2.6gr. So you can reach a total weight of 58.4gr. The original chassis weighs 19gr. So, this option helps to add a maximum of weight to the lowest in order to lower the center of gravity of the chassis. The addition / removal of the brass inserts is very quickly using only 2 screws. The chassis is delivered without brass inserts.
Material: Aluminium Set contents / Set enthält : M2 x 4mm – 2mm thickness (4pcs) M2 x 4mm – 1mm thickness (4pcs) M2 x 4mm – 0.5mm thickness (4pcs) M2 x 4mm – 0.25mm thickness (4pcs)
This part is machining in high quality fiber carbon material.Spare part of the LRC conversion kit (TR088-LRC)
3.1 x 4.5mm shims to tune your car This kit include : 0.05mm shims x 10pcs 0.1mm shims x 10pcs 0.2mm shims x 10pcs 0.3mm shims x 10pcs
Die Version 2 der beliebten Front Achsen mit Innengewinde. Jetzt aus Titanium für mehr Haltbarkeit. Die V2 Achsen ermöglichen es, den vorderen Offset um 1mm Spurweite in Schritten von 0,5 mm durch die mitgelieferten M3x0,5 mm Axle Shims anzupassen. Die Achsen mit umgekehrtem Gewinde sind kompatibel mit dem Reflex Racing RX28 und auch GL Racing oder RTRC Fahrzeugen. Durch die Umkehrung des Gewindes und die Verwendung einer Schraube anstelle einer Mutter, ist es weniger wahrscheinlich, dass sich die Frontpartie Ihres Fahrzeugs in den RCP-Schienen verfängt, wenn Sie Räder mit geringerem Offset fahren. Das Kit wird mit 2 Achsen, 4 Stück M3x0,5 Kupferscheiben und 2 Stück M2x4mm Kopfschrauben geliefert. Tipp! Abhängig vom verwendeten Radtyp kann es vorkommen, dass die Achsen ein wenig axiales Spiel haben (minimal). Sie können dies durch leichtes Abschleifen der äußeren Achse beheben, um sie etwas schmaler zu machen. *****************************This is the V2 of our reverse axles. Now made from Titamium for more durability. The V2 axles allow you to adjust your front offset 1mm of trackwidth in increments of 0.5mm though the included M3x0.5mm Axle Shims. Reverse thread axles compatible with your Reflex Racing RX28 and GL/Atomic cars. By reversing the thread and using a screw instead of a nut, the front end of your car is less likely to snag into the RCP rails when running lower offset wheels. The kit comes with 2 Axles, 4pcs of M3x0.5 Copper Shims and 2pcs of M2x4mm button head screws. Tip: Depending on the type of wheel you use, sometimes, the axles can have a little bit of axial side to side play (minimal). You can tighten this up by lightly sanding the outer axle to make is slightly narrower.
Custom made spring kit to adjust the different characteristics of : RTA V1.2 / V2 / V3 chassis on the front RTB chassis on the front and rear
High Quality Double Shield Ceramic Bearing Set for your 1/28th scale car with 3mm front axles.These bearings have very low axial play and spin super free.
This part is compatible with the RTA servo saver (RT103).It allows quick adjustment of your RTA’s ackermann: Blue position: Fast track layout Green position: Mixed track layout Red position: Twisty track layout BE CAREFUL : The red position can be used only if some modifications are made on the front end (RT003 V2) to give more clearance to the ball caps. Made in high quality aluminium 7075-T6.
This part is machining in good quality fiber carbon material.
Die neue V2 Front für den RTA V1.2 : Neue Frontbrücke mit neuer Befestigung: Freiere und reaktionsfreudigere Frontpartie Langfristige Stabilität Identisches System an allen 4 ArmenNeus Design: Keine Reibung mehr zwischen dem Arm und der Stange Reduzierte Kontaktfläche zur Begrenzung der ReibungEinfachere Einstellung: Ausfederwegbegrenzung entferntVerbesserte Stabilität: 3 Grad Nachlauf hinzugefügtVerbessertes handling : 2mm breitere Spurbreite vorne Verbesserter Ackermann WinkelTipps zum Zusammenbau :Verlängere die Lenkstangen um je 1mm => Totale Länge: 24.6mm Sorge dafür, dass die Kugeln in den Achsschenkeln sich leicht und geschmeidig bewegen lassen.Wir empfehlen die Verwendung des Stabilisators (RT081) RT001 V1.2 A-Arms sind nicht kompatibel. Bitte benutze die RT001 V2 A-Arms.Im Lieferumfang enthalten : 1 x Aluminum Frontbrücke 4 x Frontarme (RT001 V2)4 x Schrauben4 x Pins für die Arme **********New design of the front axle of the RTA V1.2 : New arms mounting system: More free and responsive front end Long-term stability Identical system on all 4 arms New design: No more friction between the arm and the bar Reduced contact surface to limit friction Easier to adjust: Removed droop adjustmentImproved stability: Added 3 degrees of caster Improves handling : Added 1mm of track on each side Improved ackerman angle Build tips :Add 1mm length on each steering rod => Final length: 24.6mm Make work the knuckles balls in the arms to make the whole smooth We advice to use sway bar with it (RT081) RT001 V1.2 A-Arms are not compatible. Please use RT001 V2 A-ArmsProduct Contents : 1 x aluminum bar 4 x arms 4 x screws 4 x arm pins
Original knuckles left and right for RTA chassis. Optimized V1.2 part. Camber : 2° These parts are machining in good quality anodized aluminium 7075-T6.
Original knuckles left and right for RTA chassis. Optimized V1.2 part. Camber : 1° These parts are machining in good quality anodized aluminium 7075-T6.
Replacement pins for V2 Front End Arms (RT003 V2)
Replacement screws for the brass weights set of the RTA (RTA090)Qty: 8pcs.Size: M1.4 x 2mm
Spare part of the anti roll bar kit RT081
Optimized version V1.2 of steering turnbuckles set for RTA chassis. RT010 V1.2 + RT011 V1.2 fits perfectly on RTA V1 and RTA V1.2. These parts are machining in good quality stainless steel.
This part is machining in high quality plastic
Set of 3* M2 round head screws, length 6mm for the RTA V1.2. Torx T6 head.
Optimized version V1.2 of friction discs for RTA chassis. Its improvement consists of a more constant glide and a bigger reserve of grease. These parts are machining in POM. This material gives the discs incomparable sliding power.
New version of the lexan friction plate. Its new shape allows easier access to the ESC to turn it on. Moreover, the carbon is now chamfered to limit friction with the friction discs.For RTA V1.2 98mm version.
Brass inserts to ballast the aluminum (RT080) and brass (RT084) option chassis of the RTA. Each insert weighs 2.6gr and is screwed using 2 micro screws. This option helps to cover a wider range of mass distribution on the chassis as well as to lower the center of gravity as much as possible. Set of 2pcs.
This shims kit allows you to very quickly adjust the front ride height of the RTA without changing the springs compression or wheels angles. This kit is composed of 3 shims of different thicknesses: 1 point shim: 0.6mm 2 points shim: 1mm 3 points shim: 1.5mm
Original knuckles left and right for RTA chassis. Optimized V1.2 part. Camber : 0° These parts are machining in good quality anodized aluminium 7075-T6.
Set of 6 M2 countersunk head screws, length 5mm for the RTA V1.2. Torx T6 head.
Nylon stop wheel nuts in black anodized aluminum. To be used with 4mm nut screwdriver.
This kit allows you to adjust the roll of the RTA. With 3 different bar hardnesses, you will be able to allow more or less roll to the chassis.Once installed, the anti-roll system is easy to enable/disable with a single screw. The following parts are required to use this option:RT001 V1.2RT003 V1.2RT004 V1.2
Kit of 2 axes for RTA chassis. Can be used as a friction axis or servo return axis. Part made of stainless steel.
These knuckles add 1 ° of camber to the RTA. Originally, the chassis already has 2 ° of camber, these knuckles will allow you to have a total camber equal to -3 °. New version of the RTA knuckles with many advantages: The shape of the knuckle allows for better suspension movement. The balls are slightly larger in order to limit the play in arms. The balls are much more resistant.
Front body mount for RTA chassis. This part allows the adaptation of most commercial carbon body mounts. This part is machining in good quality anodized aluminium 7075-T6.