Discover the new Marka Racing sensor motor: the ultimate in power and precision for your 1:28 racing!Designed with an innovative layout, featuring strategic openings to ensure optimal cooling.Thanks to its high mechanical advance, the Marka Racing delivers explosive performance: to get the most out of it,configure your ESC following these guidelines:- With a 12T pinion and 53T spur gear, set the ESC with a "5°" BOOST and a maximum TURBO of "5°".- With a 14T pinion and 53T spur gear, ideal settings are "10°" BOOST and a maximum TURBO of "5°". Keep an eye on your motor temperature. High mechanical advance results in rapid accelerations and high top speeds. Remember, to maintain top performance, never a Exceed 20° between TIMING and TURBO combined! This motor is built to pass all non-sensored Kv checking events with a 2800Kv limit.You will find the range of the Kv, un-sensored between ~2680 and ~2770 Kv. By moving the internal shim towards the top or bottom of the rotor, is possible to change the range of about 2640-2800Kv.

The Marka Racing Brushless Motor 3500kv have much-more torque and acceleration than others VE motor. The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color. In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 30000 with 8.4VKV Rating: 3467Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.2A Timing: Fix Weight: 17.3grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed  Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm). The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount. Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.

Discover the new Marka Racing sensor motor: the ultimate in power and precision for your 1:28 racing!Designed with an innovative layout, featuring strategic openings to ensure optimal cooling.Thanks to its high mechanical advance, the Marka Racing delivers explosive performance: to get the most out of it,configure your ESC following these guidelines:- With a 10T pinion and 53T spur gear, set the ESC with a "5°" BOOST and a maximum TURBO of "5°".- With a 12T pinion and 53T spur gear, ideal settings are "10°" BOOST and a maximum TURBO of "5°". Keep an eye on your motor temperature. High mechanical advance results in rapid accelerations and high top speeds. Remember, to maintain top performance, never a Exceed 20° between TIMING and TURBO combined!

The Marka Racing Brushless Motor 4500kv have much-more torque and acceleration than others VE motor. The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color. In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 43000 with 8.4VKV Rating: 4467Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.2A Timing: Fix Weight: 17.3grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed  Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm). The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount. Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.

Discover the new Marka Racing sensor motor: the ultimate in power and precision for your 1:28 racing!Designed with an innovative layout, featuring strategic openings to ensure optimal cooling.Keep an eye on your motor temperature!High mechanical advance results in rapid accelerations and high top speeds. Remember, to maintain top performance, never a Exceed 30° between TIMING and TURBO!

The Marka Racing Brushless Motor 5500kv have much-more torque and acceleration than others VE motor. The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color. In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 47000 with 8.4VKV Rating: 5467 Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.4A Timing: Fix Weight: 17.4grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed  Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm). The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount. Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.

Discover the new Marka Racing sensor motor: the ultimate in power and precision for your 1:28 racing!Designed with an innovative layout, featuring strategic openings to ensure optimal cooling.Keep an eye on your motor temperature!High mechanical advance results in rapid accelerations and high top speeds. Remember, to maintain top performance, never a Exceed 30° between TIMING and TURBO!

Discover the new Marka Racing sensor motor: the ultimate in power and precision for your 1:28 racing!Designed with an innovative layout, featuring strategic openings to ensure optimal cooling.Keep an eye on your motor temperature!High mechanical advance results in rapid accelerations and high top speeds. Remember, to maintain top performance, never a Exceed 30° between TIMING and TURBO!

The Marka Racing Brushless Motor 7500kv have much-more torque and acceleration than others VE motor. The Marka Motor heatsink can is annodized with black color and the Alu end-bell is annodized in red color. In this way we tryed to keep Marka brand colors and offer a nice design. SpecificationsScale: 1/28th BrushlessSensorlessRPM: 63000 with 8.4VKV Rating: 7430 Kv LiPo/Nimh Cells: 2S or 4xNimh 1.2V (4.8V) No-load Current: 0.4A Timing: Fix Weight: 17.7grAluminium Heatsink Canhas the 15mm diameter same as normal brushed 130 motor.has holes in the front and lateral sides for a good ventilation that allows for a better heat dispersionin the front there are M2 screws holes that allows to fit the motor on all the types of Miniz motor mount and chassis has printed Marka logo on the lateral side and the Kv number to recognize the motor type Stator high quality wires used for high temperature and longevity life high quality wires producing good torque and speed  Rotor The rotor has the following size 6.0x14.5mm is the standard one. The rotor is interchangeable and is possible change with other size 6x(11.5mm-12.5mm-13.5mm-15.5mm-16.5mm). The shaft is 2mm. Bearing JAPAN high quality duel ball Bearing included Compatible Fits in all Kyosho, PN Racing, GL Racing, Atomic, Xpower motor mount. Fits in all Mini-Z chassis MR02, MR03, F1, AWD, GLR, GLA, GLF, BZ ect. Wire ConnetionFor connect to the ESC use 22AWG/0.35mm silicon wire Screws To mount the motor on the motor mount, use the following screws: On PN Racing motor mount use M2x4mm countersunk screws for aluminum/metal On GL Racing (GLR, GLA e GLF) or Atomic (BZ) motor mount use M2x4mm button screws for aluminum/metal The screws are not included.