Get ready to up your racing program with the RX28SE Gen 3, the ultimate 1/28th-scale RC car engineered for enthusiasts who crave precision, versatility, and style. This third-generation marvel takes performance to new heights with cutting-edge upgrades that let you fine-tune your ride and conquer any track with confidence.
Feel the difference with the redesigned front end, featuring 1mm longer arms for enhanced stability and a new sway bar system that keeps your cornering razor-sharp. Dial in your setup with adjustable caster (3 screws), an integrated shock tower with shim adjustment, and adjustable upper arm hinge pin height for effortless camber gain and roll center tweaks. The low-profile big bore shocks and springs deliver silky-smooth handling, soaking up bumps while keeping you glued to the track.
The rear end sees many improvements as well. A new, much lower CG Rear End sees an all new motor mount that lowers the motor by 0.8mm, a new damper mount secured by 3 screws for easier service to the rear suspension, a tweak brace dropped 1.25mm, shorter side springs, thinner spring perches, side dampers lowered by 3mm (secured by screws on the motor mount), and smaller diameter center shock spring, collar and perch, all which allow for higher corner speeds and quicker direction changes. Finally, a pinned Rear Motor Pod Plate increases precision and durability on the car.
The RX28SE Gen 3 is loaded with extras to fuel your passion: choose between a gear differential or ball differential to match your driving style, and enjoy gray or black plastic options for a custom look. The SE Kit still comes complete with a front bumper, two sets of wheels and tires, and our innovative body post system for easy body swaps.
Dimensions:
98mm Wheelbase
145g-170g weight RTR Depending on body and Electronics
69mm to 78mm Rear Track Width
72mm to 75mm Front Track Width
Need to Complete:
Body
Electronics: Motor, Lipo Battery, ESC, Receiver and Servo (Please note, the provided servo horn is designed to work with the AGF A06CLS Servo 20T Spline. Additionally, the GL Titanium Servo will fit as well.
****ELECTRONICS ARE NOT INCLUDED!!!
Optional CF Pod Plate for you SE Gen3 Kit. This CF piece will shed about 3g of weight and it will increase rotation of your car. Recommended for stock classes.
The RX28D Gen 3 is here to redefine what a 1/28th-scale RC car can do. Designed for drivers who demand speed, agility, and pinpoint control, this third-generation model packs a host of upgrades that make every run feel like a victory lap.
The revamped front end features 1mm longer arms for improved stability, paired with a sway bar system that lets you carve corners with surgical precision. Fine-tune your setup with adjustable caster (3 screws), an integrated shock tower with shim adjustment, and adjustable upper arm hinge pin height for tailored camber gain and roll center. The RX28D also comes with all new lighter, but durable plastic knuckles and they are combined with also new, low-profile big bore shocks and springs which ensure smooth, responsive handling, giving you the edge on any surface.
The rear end sees many improvements as well. A new, much lower CG Rear End sees an all new motor mount that lowers the motor by 0.8mm, a new damper mount secured by 3 screws for easier service to the rear suspension, a tweak brace dropped 1.25mm, shorter side springs, thinner spring perches, side dampers lowered by 3mm (secured by screws on the motor mount), and smaller diameter center shock spring, collar and perch, all which allow for higher corner speeds and quicker direction changes. Finally, a pinned Rear Motor Pod Plate increases precision and durability on the car.
This third generation car is also much easier to work on as well. The car now uses mostly ball studs all around, which standardized hardware and makes it much easier to work with.
The RX28D Gen 3 comes ready to roll with one set of wheels and tires, perfect for getting you on the track fast.
Dimensions:
98mm Wheelbase
145g-170g weight RTR Depending on body and Electronics
69mm to 78mm Rear Track Width
72mm to 75mm Front Track Width
Need to Complete:
Body and mounting hardware
Electronics: Motor, Lipo Battery, ESC, Receiver and Servo (Please note, the provided servo horn is designed to work with the AGF A06CLS Servo 20T Spline. Additionally, the GL Titanium Servo will fit as well.
****ELECTRONICS ARE NOT INCLUDED!!!
All new shorter, big bore Shock Set for your Gen 3 RX28. These shocks increase the damping ability of your front end and also lower the CG for faster cornering. Please note that these have to be used with the newer front springs.
